題庫堂
檢索
題庫堂
首頁
數學
英文學習
政治學
統計學
經濟學
藥理學
中醫藥物學
財政學
法學知識
公共行政
警察學
BI規劃師
財務管理
公共衛生學
工程經濟學
電力電子學
當前位置:
首頁
12.David often drives carelessly and exceeds the speed limit, ______ he claims he’s never had an acc
問題詳情
12.David often drives carelessly and exceeds the speed limit, ______ he claims he’s never had an accident.
(A)yet
(B)as
(C)so
(D)for
參考答案
答案:A
難度:
計算中
-1
書單:
沒有書單,新增
上一篇 :
17. ARM 是主推精簡指令集(RISC)架構處理器為主,但基於不同計算量與應又分別推出不同體系的處理器,其中應於高性能手機 SOC 架構形式之處理器系列為下列何種?(A)Cortex-A(B) C
下一篇 :
18. 下列哪一款積體電路(IC)是常的運算放大器?(A)LM385(B) LM339(C) LM311(D) LM358
資訊推薦
13.______ in 1965, the spacecraft Mariner 4 took photographs and analyzed the atmosphere of Mars as
19. 已知有一多級放大器,其輸入電阻為 1 K Ω,而負載為 9 Ω,當輸入電壓為 100V 時,其輸出電壓為 30V,求其功率增益為多少 dB? (A)40(B) 30(C) 20(D) 10
14.The suspect confessed to the police that he ______ the bank the previous night.(A)would rob(B)had
15.I hope to do as ______ swimming this summer as I did last year.(A)a lot(B)possible(C)much(D)many
Questions 16–22 The digital age is dawning, and that’s good news for Asian companies. Already
【題組】17.(A)until(B)because(C)whenever(D)in that
【題組】18.(A)recreation(B)animation(C)innovation(D)organization
【題組】19.(A)some(B)to(C)once(D)and
【題組】20.(A)offering(B)offered(C)did offer(D)would offer
【題組】21.(A)taking its leave(B)paving its way(C)catching its breath(D)following its lead
【題組】22.(A)on(B)up(C)at(D)in
Questions 23–30 In modern hospitals, the most popular treatment for bacterial infection is an
【題組】24.(A)Consequently(B)Fortunately(C)Hopefully(D)Alternatively
【題組】25.(A)problems(B) treatments(C) bacteria(D) antibiotics
【題組】26.(A)richly(B) likely(C) calmly(D) freely
【題組】27.(A) allowing(B) allows(C) allowed(D) allow
【題組】28.(A)If(B)But(C)What(D)Whether
【題組】29.(A)using(B)uses(C)used(D)to use
【題組】30.(A)theory(B)victory(C)advice(D)result
34. 如右圖所示之理想放大器,試求其工作週期( > 0之週期占比)? (A) (B)(C) (D) 1
31. 有一化合物其示性式為 ,具有八種可能的異構物,其中有幾種在酸性溶液中可與重鉻酸鉀反應生成五碳醛,且可與過錳酸鉀作用產生五碳酸?(A) 2 種(B) 3 種(C) 4 種(D) 5 種
2. 下列有關晶粒的敘述何者正確?(A) 金屬在液態時,若凝固速度愈慢所獲得的晶粒較為微細(B) 相同大小面積的晶界愈多表示晶粒愈粗(C) 晶粒受力變形後,結晶格子亦隨之改變(D) 多結晶材料在室溫或
8. 下列有關鑄造之敘述,何者錯誤?(A) 鑄造時冒口應設在最大斷面處(B) 均勻斷面成旋轉對稱之物體以刮板模型較為方便(C) 鑄模中,冒口具有增加冷卻速度的功能(D) 如欲清除鑄件之鑄造應力,並使軟
14. 下列有關塑性加工之敘述何者正確?(A) 金屬材料冷作後,內部會造成殘留應力,易使機件損壞,欲消除此種應力,可將金屬加熱至再結晶溫度範圍以下,施以製程退火(B) 材料延展性低者,加工限度大(C)
15. 下列有關多軸工具機之敘述,何者錯誤?(A) 後處理程式是將刀具路徑資料(Cutter Location data)轉成 NC 碼的工具(B) 多軸工具機之刀具路徑資料較三軸工具機多了刀具方位角